Skip to content
sutracemachine intelligence
Connect machine

Continuous machine record

Know what changed.
Inspect what matters.

Sutrace records machine signals with their source and timestamp, keeps missing intervals visible, and turns verified drift into a specific next inspection.

Connect a machine Open hardware console
Observer only Source and timestamp preserved Missing signal stays visible
PRODUCT VIEW · ILLUSTRATIVE MACHINE TRACE
sutraceLine 04 · Göteborg
12 live1 gap
press-04 · axial vibration3.81 mm/s
06:0010:0014:00

Recommended action · confidence 94%Inspect the drive-end bearing within 18 hours.Vibration drift is extending cycle time. Verify lubrication before the night shift.

Open machine
01Keep the controls
02Verify the signal
03Explain the evidence
04Name the action

Verified machine history

From raw telemetry
to one reliable trace.

A press records each cycle. A pump exposes every pressure spike. Sutrace joins those machine dialects into a record operators can read, replay, and act on.

01 · Capture

Keep the machine as it is.

Keep the PLCs, sensors and controls already on the floor. A gateway translates their signals without changing the machine.

02 · Understand

See the drift in context.

Temperature, vibration, energy and cycle time are read together, so a change arrives with operational context.

03 · Act

Leave with one clear move.

Every recommendation names the asset, evidence, urgency and practical intervention. No vague anomaly score.

Actionable intelligence

Every alert ends
with a next inspection.

Recommendations are ordered by intervention window and carry their evidence with them.

01
press-04Inspect within 18 hours

Drive-end bearing wear is extending cycle time.

Axial vibration 2.1 → 3.8 mm/s · cycle time +6.4% · confidence 94%

Inspect the drive-end bearing and verify lubrication before the next night shift.

02
pump-11Next planned stop

A cavitation signature is forming under peak load.

Pressure oscillation +9% · inlet temperature stable · confidence 89%

Check the inlet filter and suction restriction during the planned 16:00 stop.

03
van-07Before dispatch

Coolant temperature recovery is slowing.

91°C after 42 min · fan-current gap 3.1 A · confidence 91%

Inspect the fan relay before tomorrow's first route.

Industrial connections

Fits the floor
you already run.

One gateway translates the protocols already trusted on the floor. Existing control and safety systems stay in place.

Connect the first machine
gateway
read-only ingest
01MQTT
02Modbus TCP
03OPC UA
04BACnet
05PROFINET
06CANopen
07J1939
08ESP32

Evidence you can keep

A thread that holds.

Sutrace is an observer, never a control loop. Readings keep their source and timestamp; missing intervals remain visible instead of being quietly interpolated.

  • Source on every reading
  • Heartbeat-derived status
  • CSV and NDJSON export
  • Operator-visible history

Begin the trace

Start with one machine.
Validate it in one shift.

Connect a gateway, verify the first frame, and begin a machine record your team can trust.

Connect a machine